Connecting to Eduroam on Android 11 or Higher Phones
Connecting to Eduroam on Android 11 or Higher Phones
1. If the CA certificate is grayed out,
follow this instruction
2. Open a web browser (i.e: google
chrome or safari)
3. Type “eduroam cat” in the search bar
4. After typing what you want to search,
press the “go” or “search” button
6. Select the “click here to download
your eduroam® installer”
7. Find “Minnesota State Colleges and
University” at the top of the list and select it
8. If you are unable to find it, you can
search for it as well
9. Once you have selected the
organization, click on “Android 11 and higher” and click on the gray “continue
box to start downloading the configuration file
10. Check your phone to make sure the
configuration file has finish installing
11. After confirming the configuration
has been successfully downloaded, locate the Google Play Store and open it
12. Locate the search bar
13. Search for “eduroam cat” on the
Google Play Store
14. The correct one to install is shown
in the figure below
15. Click on the green “install” button
16. Once it is done downloading, click on
the green “open” button
17. Once you open it, there will be a
prompt that ask if you want to allow location access. Click on “while using the
app”
18. The next prompt would then ask for
access to your media. Click on “Allow”
19. After allowing, locate “Minnesota
State Colleges and Universities” option
20. Click on “install”
21. Click “yes”
22. To confirm you are on the correct
page, please compare it to the image below
23. Fill in the username and password
information with the following format.
b. Password: StarID password
24. Once the information has been put in,
click on “install”
25. If the user is already connected to
“eduroam” or had connected to “eduroam” before, they will receive the following
prompt. Click “Yes” as well. If you did not receive a prompt, go to step 29.
26. You will be brought to the Wi-Fi
connection screen. Locate “Eduroam”
27. Click on the gear icon to the right
of the Wi-Fi name
28. There will be an option to forget.
Click on “forget”. Once that is done, go back to step 16.
29. You have successfully configured the
Eduroam cat. Compare your end screen with the image below.
Related Articles
Connecting To Eduroam (iOS)
Connecting To Eduroam (iOS) This article will guide you through how you can connect to Eduroam on your iOS device. The iOS device includes iPads and iPhones. 1. Go to the "settings" app on your iOS device. 2. Click on the "Wi-Fi" setting. 3. Click on ...Connecting to Eduroam (MacOS)
Connecting to Eduroam (MacOS) Before continuing with the documentation, please make sure that your StarID and password are both active. If it is either inactive or you are not sure if it is active, please reset your password by following the Password ...Campus Phones and Voicemail
Campus Phones and Voicemail Saint Paul College utilizes a Cisco VoIP (Voice over IP) phone system. This system integrates with the college’s network, allowing you to check your voice messages through the college email. Phone Directions Log in and out ...Connect To Eduroam (Window OS)
Connect To Eduroam (Window OS) Eduroam is a secure network connection for everyone who has an active StarID and password. A StarID and password is required to connect to Eduroam. 1. In the bottom right corner of your computer screen, click on the ...Bring Your Own Device (BYOD) Printing for Android
Bring Your Own Device (BYOD) Printing for Android Please make sure you are connected to "Eduroam" before continuing. Installing and Downloading the Configuration File 1. Open up a web browser 2. click on the search bar and type ...